- Failsafe Switch Design assures continued operation even if switch
contacts fail.
- Less than 30 micro amps current draw when switched off. Batteries can
be left connected
for months without significant drain when the unit is switched off.
- 5A maximum current rating.*
- 3 pin up/down adjustment port provides 32 programmable output
voltages.
- High reliability Surface Mount components reduce weight and size.
- Ideal for redundant power applications.
- Low dropout voltage design.
- For 2 cell LiPo / LiIon or 5 cell NiMh / NiCad applications.
- Programmable voltage ranges from 5.75V to 6.65V
(factory adjusted to 6.2V).
**
- Multiple battery / multiple regulator configuration support for
either concurrent or
failover redundancy.
- Integrated Switch and Battery voltage monitoring/charge port / DSC
connection.
- Customized output voltage ranges and adjustment increments available
by special order.
*Normal
flight operation with up to 6 high torque digital servos per regulator
will not
require additional heat sink when operational guidelines are followed.
**
Available "E-Z Set" programming box
with
integrated digital voltmeter is recommended for best adjustment
results.
Contact Tech-Aero Support